Well-kept and shiny car always looks expensive and prestigious, regardless of its real value. As a special tool, generally used compositions are wax-based, but nowadays there are easier to use and more qualitative tool for polishing cars called liquid glass. On this later in the article.
Liquid glass has recently enjoyed great popularity among motorists. After processing this part of your vehicle will sparkle like a jewel. In addition, liquid glass has the ability to remove minor defects, scratches and cracks on the surface of the car body. This product protects the car from further damage, rust and UV exposure.
This cover looks very fragile, but this fragility is just an illusion. In fact, the protective film is very solid. In the product glass is not included, and its main active element is silicon dioxide. This component at the molecular level interacts with the paint coating. In the end, on the surface of the car body occurs the film mirror effect, which is of relatively high strength. Besides, it is durable and can serve its owner for more than one year.
Today, there are three variations of liquid glass.
It is through these means is made of liquid glass, used as polishes for car:
All three types of liquid glass can be combined into one category of certain compounds. In addition, there are integrated and combined. Sell liquid glass can. For example, in the form of containers with liquid that should be applied to the surface of the car and wait for the drying – means kristallizuetsya and creates a glossy surface.
Apply liquid glass on the car you need in several stages.
The kit should include tools: basic composition and a hardener, pipette (need for blending), protective gloves, a soft sponge, towels, and special fiber for manual polishing. If something is missing, it is advisable to buy.
Not recommended for treatment of liquid glass, if the car was a long time in the sun and warmed up significantly – it is important that the metal was cold. Experts advise to perform all work in a warm and dry place, avoiding sunlight and dust. The room temperature should be 15-30 degrees.
At this stage, you should thoroughly wash the vehicle to remove all the contamination. Then remove the fat from the surface and give the car to dry. Degreasing is carried out using diluted in water white spirit. Prohibited to use poor quality alcohols or silicone tools are also unacceptable use of funds, leaving a film. If the car body was already covered with any of the polishes must be removed. Otherwise, the new coat will last much less than the planned time and will not stay on the surface.
Upon completion of the preparatory work, start polishing the car with liquid glass. Do not apply makeup at all over the surface of the body – it is advisable to practice on a small area of the car. If the Polish provides the expected result and normally adjacent to the surface, unable to get to work.
Apply liquid glass should gradually polishing each section. For example, you can start handling the bumper or right wing. Once polishing of one element is completed, proceed to the next stage. This approach has its advantages. First, the applied medium will not dry up. Second, get higher quality to do the job.
After applying a small quantity of composition on the surface, it is necessary to RUB it with a soft cloth, which should be included in the package. In the process the procedure make sure that the surface of the car is not exposed to dust or dirt. Once you do the whole body, leave the car alone for 4-6 hours. In this case, molten glass is finally grasped in two weeks. Preferably in this period does not wash your car (especially the sink).
The effect after using liquid glass is stunning. The body of the car shines as if just out of the salon. The color was rich and bright. Drops themselves roll off the car, and it looks great. Compared to conventional wax tools, liquid glass is much better.
In addition, it eliminates fine scratches, protects the body from rust, fading and water repellent properties. Machine polished with liquid glass, much easier to clean, it does not stick the mud, and the film protects the car body from damage.